SSurplusBuilder.
B-grade surplus plumbing & heating — Underfloor heating — 8-port UFH manifold + 200m PEX — CardiffB-grade

Underfloor heating — 8-port UFH manifold + 200m PEX — Cardiff

Cardiff·Full kit·Listed 12d ago
£460/lot

Sold by Cardiff Urban Reclamation (Demolition) · Ref L0609

Contact sellerHow buying works

Condition grade 6/10 (B-grade). Assessed by the seller at listing; figures below relate to this specific lot of Full kit.

About this lot

Surplus UFH kit with actuators, blending valve and pump. Enough for ~80m². Located in Cardiff — collection or arranged regional delivery available. Direct from Cardiff Urban Reclamation, a demolition operating out of Cardiff; live for 12 days.

This is exactly the kind of material that typically ends up in a skip costing the seller money; buying it diverts it back into a build. It is graded down on appearance alone; structurally and functionally it performs as A-grade.

Measurements & specifications

Manifold
8 port stainless
Pipe
200m × 16mm PEX-AL
Location
Cardiff
Ref
SB-63-11
Quantity / lot size
Full kit
Pressure test
Bench-tested to 5 bar — no loss over 30 min
Connections
Compression 15/22mm
Compliance marks
BS EN 1057 stamped
Boxed weight
74 kg total lot weight (approx.)

Condition report & known defects

6/10
  • Cosmetic seconds — graded down for appearance, not performance.
  • Allow a cutting/waste margin of ~10% over a normal A-grade order.

Carbon & sustainability notes

This listing carries no CO₂-saved figure because the material is new; the sustainability win here is waste prevention — first-quality stock staying out of the waste stream entirely.

With Part Z and embodied-carbon reporting moving up the agenda, documented reuse like this is increasingly worth recording in your project's carbon log.

Collection & delivery

  • Buyer collection in Cardiff; telehandler on site, HGV access fine.
  • Nationwide pallet courier available — typically £75–£100 per pallet, 2–4 working days.
  • Viewings welcomed by appointment; the measurements table above reflects what was checked at listing.

Typical applications

  • Landlord boiler swaps (warranty stock)
  • Underfloor heating zones and extensions
  • Full heating system installs at a discount
  • Period radiator restoration projects

How to buy, collect and install this lot

  1. 1Confirm your requirement against the measurements above — bring a tape and the Full kit figure when you visit Cardiff Urban Reclamation in Cardiff.
  2. 2Reserve the lot in writing with a deposit; get the batch/reference (L0609) and condition grade (6/10) on the receipt.
  3. 3Arrange transport: forklift loading available weekdays 7:30am–4pm. Confirm access at your delivery address (width, overhead clearance, forklift or hand-ball).
  4. 4On arrival, check the count against the Full kit stated and photograph any transit damage before signing the delivery note.
  5. 5Store correctly on site — for plumbing, that means dry, level and off the ground; keep original packaging on until the day of use where possible.
  6. 6Dry-lay or trial-fit a small sample first to confirm plumbing performs as expected in your specific application before committing the whole lot.
  7. 7Log the reuse for your project records: photograph the seller invoice, capture the ~0 kg CO₂e figure and save this listing URL in your embodied-carbon file.

Pre-purchase checklist

  • Measure twice — confirm Full kit covers your net requirement plus a 7% waste/cutting allowance.
  • View in person or request a video walkround from Cardiff Urban Reclamation; do not rely on the hero photograph alone.
  • Check condition against the 6/10 grade above — ask which specific defects apply to the units you'll actually receive.
  • Confirm the batch or shade reference (L0609) so what you inspect is what you collect.
  • Agree collection or delivery cost in writing — pallet, hiab, flatbed or hand-ball each price very differently.
  • Verify VAT position: is the £460/lot figure ex-VAT or inclusive? Trade sellers default to ex-VAT.
  • Ask about returns or replacements if the delivered quantity falls short — reputable demolitions stand behind the stated count.
  • Screenshot this listing (title, price, condition, CO₂ figure) as your negotiation baseline — surplus prices drift as lots age.
  • Check compatibility if you're matching existing material (brick blend, tile shade, timber section) with a physical sample first.
  • Book collection or delivery within your reservation window — b-grade lots at this price rarely sit for long.

Price in context

  • At £460/lot, this lot sits roughly 45% below current UK merchant list for equivalent new material — the typical spread for b-grade plumbing.
  • Delivered-to-door pricing (including pallet freight within ~57 miles of Cardiff) tends to add £75–£130 to the headline figure; collection stays as advertised.
  • Comparable b-grade lots in the surplus plumbing & heating category have moved on SurplusBuilder within 4 days of listing — well-priced surplus doesn't linger.

Sustainability deep-dive

The headline saving on this listing (waste avoidance) is benchmarked against manufacturing new heating plant (a cast-iron radiator ~45 kg CO₂e; a boiler ~300 kg CO₂e). That's the embodied-carbon figure — the emissions locked into new material at the point of manufacture, before it ever reaches your site.

In UK building terms, embodied carbon typically accounts for 40–60% of a project's whole-life emissions once operational energy is decarbonised. Reusing plumbing like this lot from Cardiff bypasses the manufacturing stage entirely, which is why substitution consistently outperforms offsetting on lifecycle assessments.

For projects tracking against Part Z (the proposed embodied-carbon amendment to the Building Regulations), BREEAM Mat 01 credits, or the RIBA 2030 Climate Challenge, reused material counts at zero embodied carbon in the A1–A3 modules. Keep the seller invoice, this listing URL and the CO₂e figure together in your carbon file.

Beyond carbon: buying this lot from Cardiff Urban Reclamation keeps first-quality plumbing out of the UK construction waste stream (currently ~62 million tonnes/year, per DEFRA). It supports the circular-economy supply chain — sellers who divert stock only continue diverting when there's a viable resale route.

Questions about this lot

Is the boiler warranty valid if I buy surplus?+

Sealed, unregistered boilers can usually be registered by your Gas Safe installer at commissioning — confirm the serial with the manufacturer before purchase.

Have reclaimed radiators been pressure tested?+

Yes — Cardiff Urban Reclamation tests before listing; the bar rating and duration are in the measurements table for this exact lot.

Who should install this?+

Gas appliances must be installed by a Gas Safe registered engineer; unvented cylinders need a G3-qualified installer. Wet UFH and radiators can be fitted by a competent plumber.

What payment and paperwork should I expect from Cardiff Urban Reclamation?+

Cardiff Urban Reclamation issues a VAT invoice on collection or dispatch — bank transfer is standard, card on request. For anything over £250 we recommend a written spec confirmation before paying, so the exact plumbing description and quantity are on record.

Can I reserve this lot while I organise transport from Cardiff?+

A short reservation (typically 48–72 hours) is usually possible with a 10% holding deposit. Surplus stock moves quickly, especially b-grade lots at this price point — confirm the hold in writing so the seller doesn't re-list.

Is this suitable for a Part L / Part Z reporting project?+

The material itself carries the same certifications as merchant stock; document the reuse route in your carbon log even without a specific CO₂e figure — waste avoidance still counts under Part Z reporting guidance.

More surplus plumbing & heating

View all →