End of line surplus insulation & plasterboard — Rockwool RWA45 50mm slabs (30 packs · ≈90m²) — EdinburghEnd of line Job lot

Rockwool RWA45 50mm slabs (30 packs · ≈90m²) — Edinburgh

Edinburgh·30 packs · ≈90m²·Listed 23d ago
£485/lot

Sold by Edinburgh Site Clearance Ltd (Demolition) · Ref L0436

Condition grade 9/10 (End of line). Assessed by the seller at listing; figures below relate to this specific lot of 30 packs · ≈90m².

About this lot

Acoustic mineral wool slabs. Packaging slightly creased, product immaculate. Ideal for studwall sound insulation. Located in Edinburgh — collection or arranged regional delivery available. Direct from Edinburgh Site Clearance Ltd, a demolition operating out of Edinburgh; live for 23 days.

This is exactly the kind of material that typically ends up in a skip costing the seller money; buying it diverts it back into a build. The range is discontinued: what is listed here is the entire available quantity.

Measurements & specifications

Density
45 kg/m³
Thickness
50mm
Location
Edinburgh
Ref
SB-43-06
Quantity / lot size
30 packs · ≈90m²
Thermal conductivity
λ 0.026 W/mK (per facing print)
Board squareness
Checked diagonal-to-diagonal on 7 sample boards
Edge profile
Tapered edge
Storage
Flat-stacked, dry, off the ground since arrival
Facing condition
Foil/paper facings intact on 97% of boards

Condition report & known defects

9/10
  • First-quality discontinued stock — no production defects declared.
  • Outer boxes may show shelf wear from showroom/warehouse storage.

Carbon & sustainability notes

This listing carries no CO₂-saved figure because the material is new; the sustainability win here is waste prevention — first-quality stock staying out of the waste stream entirely.

With Part Z and embodied-carbon reporting moving up the agenda, documented reuse like this is increasingly worth recording in your project's carbon log.

Collection & delivery

  • Buyer collection in Edinburgh; car/van accessible, assistance with loading provided.
  • Nationwide pallet courier available — typically £55–£110 per pallet, 2–4 working days.
  • Viewings welcomed by appointment; the measurements table above reflects what was checked at listing.

Typical applications

  • Acoustic upgrades between floors
  • Warm roof build-ups and rafter-level insulation
  • Floor insulation under screed or chipboard
  • Dot-and-dab and stud-wall drylining

How to buy, collect and install this lot

  1. 1Confirm your requirement against the measurements above — bring a tape and the 30 packs · ≈90m² figure when you visit Edinburgh Site Clearance Ltd in Edinburgh.
  2. 2Reserve the lot in writing with a deposit; get the batch/reference (L0436) and condition grade (9/10) on the receipt.
  3. 3Arrange transport: kerbside hand-load or forklift by arrangement. Confirm access at your delivery address (width, overhead clearance, forklift or hand-ball).
  4. 4On arrival, check the count against the 30 packs · ≈90m² stated and photograph any transit damage before signing the delivery note.
  5. 5Store correctly on site — for insulation, that means dry, level and off the ground; keep original packaging on until the day of use where possible.
  6. 6Dry-lay or trial-fit a small sample first to confirm insulation performs as expected in your specific application before committing the whole lot.
  7. 7Log the reuse for your project records: photograph the seller invoice, capture the ~0 kg CO₂e figure and save this listing URL in your embodied-carbon file.

Pre-purchase checklist

  • Measure twice — confirm 30 packs · ≈90m² covers your net requirement plus a 11% waste/cutting allowance.
  • View in person or request a video walkround from Edinburgh Site Clearance Ltd; do not rely on the hero photograph alone.
  • Check condition against the 9/10 grade above — ask which specific defects apply to the units you'll actually receive.
  • Confirm the batch or shade reference (L0436) so what you inspect is what you collect.
  • Agree collection or delivery cost in writing — pallet, hiab, flatbed or hand-ball each price very differently.
  • Verify VAT position: is the £485/lot figure ex-VAT or inclusive? Trade sellers default to ex-VAT.
  • Ask about returns or replacements if the delivered quantity falls short — reputable demolitions stand behind the stated count.
  • Screenshot this listing (title, price, condition, CO₂ figure) as your negotiation baseline — surplus prices drift as lots age.
  • Check compatibility if you're matching existing material (brick blend, tile shade, timber section) with a physical sample first.
  • Book collection or delivery within your reservation window — end of line lots at this price rarely sit for long.

Price in context

  • At £485/lot, this lot sits roughly 28% below current UK merchant list for equivalent new material — the typical spread for end of line insulation.
  • Delivered-to-door pricing (including pallet freight within ~57 miles of Edinburgh) tends to add £55–£95 to the headline figure; collection stays as advertised.
  • Comparable end of line lots in the surplus insulation & plasterboard category have moved on SurplusBuilder within 4 days of listing — well-priced surplus doesn't linger.

Sustainability deep-dive

The headline saving on this listing (waste avoidance) is benchmarked against producing virgin PIR/mineral wool boards (PIR ~3.5 kg CO₂e per m² at 100mm). That's the embodied-carbon figure — the emissions locked into new material at the point of manufacture, before it ever reaches your site.

In UK building terms, embodied carbon typically accounts for 40–60% of a project's whole-life emissions once operational energy is decarbonised. Reusing insulation like this lot from Edinburgh bypasses the manufacturing stage entirely, which is why substitution consistently outperforms offsetting on lifecycle assessments.

For projects tracking against Part Z (the proposed embodied-carbon amendment to the Building Regulations), BREEAM Mat 01 credits, or the RIBA 2030 Climate Challenge, reused material counts at zero embodied carbon in the A1–A3 modules. Keep the seller invoice, this listing URL and the CO₂e figure together in your carbon file.

Beyond carbon: buying this lot from Edinburgh Site Clearance Ltd keeps first-quality insulation out of the UK construction waste stream (currently ~62 million tonnes/year, per DEFRA). It supports the circular-economy supply chain — sellers who divert stock only continue diverting when there's a viable resale route.

Questions about this lot

Do part-sheets affect building control sign-off?+

No — what matters is the declared lambda value and installed thickness. Keep a facing photo showing the print line for your Building Regs file.

How should boards be stored on site?+

Flat, dry and off the ground. PIR facings degrade with prolonged UV exposure, so keep the wrap on until the day of fixing.

Is mixed-brand insulation OK in one roof?+

Yes, provided each zone's U-value calc uses the correct lambda for the board actually installed there. This lot is single-brand across all 8 packs.

What payment and paperwork should I expect from Edinburgh Site Clearance Ltd?+

Edinburgh Site Clearance Ltd issues a VAT invoice on collection or dispatch — bank transfer is standard, card on request. For anything over £500 we recommend a written spec confirmation before paying, so the exact insulation description and quantity are on record.

Can I reserve this lot while I organise transport from Edinburgh?+

A short reservation (typically 48–72 hours) is usually possible with a 10% holding deposit. Surplus stock moves quickly, especially end of line lots at this price point — confirm the hold in writing so the seller doesn't re-list.

Is this suitable for a Part L / Part Z reporting project?+

The material itself carries the same certifications as merchant stock; document the reuse route in your carbon log even without a specific CO₂e figure — waste avoidance still counts under Part Z reporting guidance.

More surplus insulation & plasterboard

View all →