SSurplusBuilder.
Reclaimed surplus plumbing & heating — Reclaimed Vented copper 210L cylinders (3 cylinders) — LondonReclaimed Job lot

Reclaimed Vented copper 210L cylinders (3 cylinders) — London

London·3 cylinders·Listed 5d ago
£440/lot
~160kg CO₂e saved

Sold by London Reclaim Co. (Demolition) · Ref L0622

Contact sellerHow buying works

Condition grade 7/10 (Reclaimed). Assessed by the seller at listing; figures below relate to this specific lot of 3 cylinders.

About this lot

Three cylinders from a hotel refurb. Good condition, no leaks, immersion bosses intact. Located in London — collection or arranged regional delivery available. Offered by London Reclaim Co. (demolition) from their London yard, listed 5 days ago.

Site over-orders, cancelled jobs and careful strip-outs are where the best material bargains in the UK come from — this lot is one of them. It is sold as reclaimed: character included, surprises excluded — read the defect notes below before bidding your time.

Measurements & specifications

Capacity
210L each
Type
Indirect vented copper
Location
London
Ref
SB-65-00
Quantity / lot size
3 cylinders
Pressure test
Bench-tested to 5 bar — no loss over 30 min
Connections
Compression 15/22mm
Compliance marks
BS EN 1057 stamped
Boxed weight
48 kg total lot weight (approx.)

Condition report & known defects

7/10
  • Surface finish shows service wear; 3% will want a primer coat before final paint.

Carbon & sustainability notes

Choosing this lot over new product avoids an estimated 160 kg CO₂e — benchmarked against manufacturing new heating plant (a cast-iron radiator ~45 kg CO₂e; a boiler ~300 kg CO₂e).

For scale: roughly 944 km in a typical petrol car, or a year's absorption for 8 established trees.

With Part Z and embodied-carbon reporting moving up the agenda, documented reuse like this is increasingly worth recording in your project's carbon log.

Collection & delivery

  • Buyer collection in London; telehandler on site, HGV access fine.
  • Nationwide pallet courier available — typically £40–£80 per pallet, 2–4 working days.
  • Viewings welcomed by appointment; the measurements table above reflects what was checked at listing.

Typical applications

  • Landlord boiler swaps (warranty stock)
  • Underfloor heating zones and extensions
  • Full heating system installs at a discount
  • Period radiator restoration projects

How to buy, collect and install this lot

  1. 1Confirm your requirement against the measurements above — bring a tape and the 3 cylinders figure when you visit London Reclaim Co. in London.
  2. 2Reserve the lot in writing with a deposit; get the batch/reference (L0622) and condition grade (7/10) on the receipt.
  3. 3Arrange transport: forklift loading available weekdays 7:30am–4pm. Confirm access at your delivery address (width, overhead clearance, forklift or hand-ball).
  4. 4On arrival, check the count against the 3 cylinders stated and photograph any transit damage before signing the delivery note.
  5. 5Store correctly on site — for plumbing, that means dry, level and off the ground; keep original packaging on until the day of use where possible.
  6. 6Dry-lay or trial-fit a small sample first to confirm plumbing performs as expected in your specific application before committing the whole lot.
  7. 7Log the reuse for your project records: photograph the seller invoice, capture the ~160 kg CO₂e figure and save this listing URL in your embodied-carbon file.

Pre-purchase checklist

  • Measure twice — confirm 3 cylinders covers your net requirement plus a 5% waste/cutting allowance.
  • View in person or request a video walkround from London Reclaim Co.; do not rely on the hero photograph alone.
  • Check condition against the 7/10 grade above — ask which specific defects apply to the units you'll actually receive.
  • Confirm the batch or shade reference (L0622) so what you inspect is what you collect.
  • Agree collection or delivery cost in writing — pallet, hiab, flatbed or hand-ball each price very differently.
  • Verify VAT position: is the £440/lot figure ex-VAT or inclusive? Trade sellers default to ex-VAT.
  • Ask about returns or replacements if the delivered quantity falls short — reputable demolitions stand behind the stated count.
  • Screenshot this listing (title, price, condition, CO₂ figure) as your negotiation baseline — surplus prices drift as lots age.
  • Check compatibility if you're matching existing material (brick blend, tile shade, timber section) with a physical sample first.
  • Book collection or delivery within your reservation window — reclaimed lots at this price rarely sit for long.

Price in context

  • At £440/lot, this lot sits roughly 51% below current UK merchant list for equivalent new material — the typical spread for reclaimed plumbing.
  • Delivered-to-door pricing (including pallet freight within ~57 miles of London) tends to add £40–£65 to the headline figure; collection stays as advertised.
  • Comparable reclaimed lots in the surplus plumbing & heating category have moved on SurplusBuilder within 4 days of listing — well-priced surplus doesn't linger.

Sustainability deep-dive

The headline saving on this listing (~160 kg CO₂e) is benchmarked against manufacturing new heating plant (a cast-iron radiator ~45 kg CO₂e; a boiler ~300 kg CO₂e). That's the embodied-carbon figure — the emissions locked into new material at the point of manufacture, before it ever reaches your site.

In UK building terms, embodied carbon typically accounts for 40–60% of a project's whole-life emissions once operational energy is decarbonised. Reusing plumbing like this lot from London bypasses the manufacturing stage entirely, which is why substitution consistently outperforms offsetting on lifecycle assessments.

For projects tracking against Part Z (the proposed embodied-carbon amendment to the Building Regulations), BREEAM Mat 01 credits, or the RIBA 2030 Climate Challenge, reused material counts at zero embodied carbon in the A1–A3 modules. Keep the seller invoice, this listing URL and the CO₂e figure together in your carbon file.

Beyond carbon: buying this lot from London Reclaim Co. keeps first-quality plumbing out of the UK construction waste stream (currently ~62 million tonnes/year, per DEFRA). It supports the circular-economy supply chain — sellers who divert stock only continue diverting when there's a viable resale route.

Questions about this lot

Is the boiler warranty valid if I buy surplus?+

Sealed, unregistered boilers can usually be registered by your Gas Safe installer at commissioning — confirm the serial with the manufacturer before purchase.

Have reclaimed radiators been pressure tested?+

Yes — London Reclaim Co. tests before listing; the bar rating and duration are in the measurements table for this exact lot.

Who should install this?+

Gas appliances must be installed by a Gas Safe registered engineer; unvented cylinders need a G3-qualified installer. Wet UFH and radiators can be fitted by a competent plumber.

What payment and paperwork should I expect from London Reclaim Co.?+

London Reclaim Co. issues a VAT invoice on collection or dispatch — bank transfer is standard, card on request. For anything over £500 we recommend a written spec confirmation before paying, so the exact plumbing description and quantity are on record.

Can I reserve this lot while I organise transport from London?+

A short reservation (typically 48–72 hours) is usually possible with a 10% holding deposit. Surplus stock moves quickly, especially reclaimed lots at this price point — confirm the hold in writing so the seller doesn't re-list.

Is this suitable for a Part L / Part Z reporting project?+

Yes — the ~160 kg CO₂e saving is calculable against the benchmark in the sustainability notes above; keep this listing URL as evidence for your embodied-carbon log.

More surplus plumbing & heating

View all →