SSurplusBuilder.
B-grade surplus insulation & plasterboard — Moisture-resistant MR plasterboard 15mm (50 sheets) — LiverpoolB-grade

Moisture-resistant MR plasterboard 15mm (50 sheets) — Liverpool

Liverpool·50 sheets·Listed 28d ago
£485/lot

Sold by Liverpool Urban Reclamation (Demolition) · Ref L0461

Contact sellerHow buying works

Condition grade 6/10 (B-grade). Assessed by the seller at listing; figures below relate to this specific lot of 50 sheets.

About this lot

For bathrooms and kitchens. Green-faced, sealed, dry stored. Located in Liverpool — collection or arranged regional delivery available. Offered by Liverpool Urban Reclamation (demolition) from their Liverpool yard, listed 28 days ago.

Site over-orders, cancelled jobs and careful strip-outs are where the best material bargains in the UK come from — this lot is one of them. It is graded down on appearance alone; structurally and functionally it performs as A-grade.

Measurements & specifications

Spec
MR 15mm
Size
2.4 × 1.2m
Location
Liverpool
Ref
SB-45-07
Quantity / lot size
50 sheets
Thermal conductivity
λ 0.029 W/mK (per facing print)
Board squareness
Checked diagonal-to-diagonal on 5 sample boards
Edge profile
Square edge
Storage
Flat-stacked, dry, off the ground since arrival
Facing condition
Foil/paper facings intact on 97% of boards

Condition report & known defects

6/10
  • Allow a cutting/waste margin of ~10% over a normal A-grade order.
  • Cosmetic seconds — graded down for appearance, not performance.

Carbon & sustainability notes

This listing carries no CO₂-saved figure because the material is new; the sustainability win here is waste prevention — first-quality stock staying out of the waste stream entirely.

Reuse is the single fastest way to cut a build's embodied carbon — substitution beats offsetting every time.

Collection & delivery

  • Buyer collection in Liverpool; forklift loading available weekdays 7:30am–4pm.
  • Regional pallet delivery can be arranged from £95 depending on postcode and lead time.
  • Inspection before purchase is encouraged — bring a tape and check sample units against the measurements above.

Typical applications

  • Floor insulation under screed or chipboard
  • Dot-and-dab and stud-wall drylining
  • Garage conversions and garden offices
  • Acoustic upgrades between floors

Questions about this lot

Do part-sheets affect building control sign-off?+

No — what matters is the declared lambda value and installed thickness. Keep a facing photo showing the print line for your Building Regs file.

How should boards be stored on site?+

Flat, dry and off the ground. PIR facings degrade with prolonged UV exposure, so keep the wrap on until the day of fixing.

Is mixed-brand insulation OK in one roof?+

Yes, provided each zone's U-value calc uses the correct lambda for the board actually installed there. This lot is single-brand across all 6 packs.

More surplus insulation & plasterboard

View all →