End of line surplus insulation & plasterboard — Moisture-resistant MR plasterboard 15mm (50 sheets) — BirminghamEnd of line

Moisture-resistant MR plasterboard 15mm (50 sheets) — Birmingham

Birmingham·50 sheets·Listed 23d ago
£455/lot

Sold by Birmingham Site Clearance Ltd (Demolition) · Ref L0456

Condition grade 9/10 (End of line). Assessed by the seller at listing; figures below relate to this specific lot of 50 sheets.

About this lot

For bathrooms and kitchens. Green-faced, sealed, dry stored. Located in Birmingham — collection or arranged regional delivery available. Direct from Birmingham Site Clearance Ltd, a demolition operating out of Birmingham; live for 23 days.

This is exactly the kind of material that typically ends up in a skip costing the seller money; buying it diverts it back into a build. The range is discontinued: what is listed here is the entire available quantity.

Measurements & specifications

Spec
MR 15mm
Size
2.4 × 1.2m
Location
Birmingham
Ref
SB-45-02
Quantity / lot size
50 sheets
Thermal conductivity
λ 0.021 W/mK (per facing print)
Board squareness
Checked diagonal-to-diagonal on 3 sample boards
Edge profile
Tongue & groove
Storage
Flat-stacked, dry, off the ground since arrival
Facing condition
Foil/paper facings intact on 100% of boards

Condition report & known defects

9/10
  • First-quality discontinued stock — no production defects declared.
  • Outer boxes may show shelf wear from showroom/warehouse storage.

Carbon & sustainability notes

This listing carries no CO₂-saved figure because the material is new; the sustainability win here is waste prevention — first-quality stock staying out of the waste stream entirely.

If your project tracks embodied carbon (BREEAM, Part Z readiness, or client ESG reporting), keep this listing reference as evidence of avoided emissions.

Collection & delivery

  • Buyer collection in Birmingham; pallet truck on site; tail-lift vehicles recommended.
  • Seller can quote hiab or flatbed delivery within ~30 miles of Birmingham; from £85.
  • Ask the seller for close-up photos or a video walkround if you can't visit — they expect the request.

Typical applications

  • Warm roof build-ups and rafter-level insulation
  • Floor insulation under screed or chipboard
  • Dot-and-dab and stud-wall drylining
  • Garage conversions and garden offices

Questions about this lot

Do part-sheets affect building control sign-off?+

No — what matters is the declared lambda value and installed thickness. Keep a facing photo showing the print line for your Building Regs file.

How should boards be stored on site?+

Flat, dry and off the ground. PIR facings degrade with prolonged UV exposure, so keep the wrap on until the day of fixing.

Is mixed-brand insulation OK in one roof?+

Yes, provided each zone's U-value calc uses the correct lambda for the board actually installed there. This lot is single-brand across all 4 packs.

More surplus insulation & plasterboard

View all →