B-grade surplus tiles & flooring — 190mm engineered oak flooring (28 m²) — CardiffB-grade

190mm engineered oak flooring (28 m²) — Cardiff

Cardiff·28 m²·Listed 4d ago
£1,075/lot

Sold by Cardiff Urban Reclamation (Demolition) · Ref L0285

Condition grade 6/10 (B-grade). Assessed by the seller at listing; figures below relate to this specific lot of 28 m².

About this lot

Surplus engineered oak — brushed and UV-oiled. Suits ground-floor installation over UFH. Located in Cardiff — collection or arranged regional delivery available. Direct from Cardiff Urban Reclamation, a demolition operating out of Cardiff; live for 4 days.

This is exactly the kind of material that typically ends up in a skip costing the seller money; buying it diverts it back into a build. It is graded down on appearance alone; structurally and functionally it performs as A-grade.

Measurements & specifications

Construction
14mm/3mm engineered
Finish
Brushed UV-oil
Location
Cardiff
Ref
SB-24-11
Quantity / lot size
28 m²
Calibre / batch
Single batch — shade code E18
Thickness tolerance
±0.5mm across sampled tiles
Slip rating
R9 (dry interior)
Boxed coverage
1.02 m² per pack
Spare allowance advised
10% over net floor area

Condition report & known defects

6/10
  • Cosmetic seconds — graded down for appearance, not performance.
  • Allow a cutting/waste margin of ~10% over a normal A-grade order.

Carbon & sustainability notes

This listing carries no CO₂-saved figure because the material is new; the sustainability win here is waste prevention — first-quality stock staying out of the waste stream entirely.

Reuse is the single fastest way to cut a build's embodied carbon — substitution beats offsetting every time.

Collection & delivery

  • Buyer collection in Cardiff; telehandler on site, HGV access fine.
  • Regional pallet delivery can be arranged from £50 depending on postcode and lead time.
  • Inspection before purchase is encouraged — bring a tape and check sample units against the measurements above.

Typical applications

  • High-traffic hallways (porcelain and LVT)
  • Over underfloor heating (check listing spec)
  • Whole-room floors where one batch matters (no re-order risk if you buy the lot)
  • Bathrooms, kitchens and utility spaces

Questions about this lot

Why is buying the full lot important with tiles?+

This is b-grade stock — once the 28 m² here is gone there is no matching batch to re-order, so buy your full area plus spares in one purchase.

Is this suitable for underfloor heating?+

Porcelain, ceramic and most engineered boards listed here suit wet or electric UFH; check the thickness in the measurements table and keep floor temperature under the manufacturer's limit.

Can I view the actual tiles first?+

Yes — inspection at the seller's Cardiff unit is encouraged, and the batch/shade code above will match what you collect.

More surplus tiles & flooring

View all →